- This topic has 3 replies, 2 voices, and was last updated 2 weeks, 5 days ago by
.
-
Posts
-
-
-
Hi Tom. I just did a brief search on YouTube for “line 6 lfs2 footswitch” and got quite a few results which should help you. From what I understand, 1 button selects the channel and the other button turns on/off the current effects when you plugged the footswitch in.
There also appears to be some Catalyst Edit software you can load on your computer to configure the footswitch for different options.
Hope this helps and Happy New Year.
Joe
The sight of a touch, or the scent of a sound,
Or the strength of an Oak with roots deep in the ground.
--Graeme Edge -
Hi Joe,
Thanks. I did not want to get in to using the computer with it. Just wanted to switch from effect to effect. Apparently all you can do is turn the effect on it the footswitch and off. If you want a separate effect you have to go over to the amp manually and turn the switch to that effect and then the footswitch will allow you to turn it on or off.Joe taking your quote a bit further.
Or to fly to the sun without burning a wing
or to lie in the meadow and hear the grass sing.
– Graeme Edge -
-
- You must be logged in to reply to this topic.
